How to Install and Register ScanMaster ELM V15 Software for ELM327 OBD2 Scanner
ScanMaster ELM V15 is a popular software for ELM327 OBD2 scanners that allows you to monitor and diagnose your vehicle's performance and emissions. It supports various OBD2 protocols and can read and clear trouble codes, display real-time data, perform oxygen sensor tests, and more. In this article, we will show you how to install and register ScanMaster ELM V15 software for your ELM327 OBD2 scanner using a keygen.
Step 1: Download and Install ScanMaster ELM V15 Software
You can download ScanMaster ELM V15 software from the official website or from other sources on the internet. Make sure you have a compatible ELM327 OBD2 scanner that supports USB, Bluetooth, or WiFi connection. To install ScanMaster ELM V15 software, follow these steps:
Run the setup file and choose your preferred language.
Accept the license agreement and select the destination folder.
Select the start menu folder and click on Install.
Click on Finish when the installation is complete.
Step 2: Generate a Registration Code with Keygen
To register ScanMaster ELM V15 software, you need a registration code that matches your name and company name. You can generate a registration code with a keygen that is included in the software package or downloaded separately. To use the keygen, follow these steps:
Open the keygen file and enter your name and company name in the corresponding fields.
Click on Generate Key and copy the generated code.
Open ScanMaster ELM V15 software on your desktop and click on Continue when prompted to enter your name and company name.
Paste the registration code in the register area and click on Register.
Click on Continue when you see 1 keys registered.
Step 3: Connect Your ELM327 OBD2 Scanner to Your Vehicle and Computer
To use ScanMaster ELM V15 software, you need to connect your ELM327 OBD2 scanner to your vehicle's OBD2 port and your computer. Depending on the type of connection, you may need to install drivers or pair devices. To connect your ELM327 OBD2 scanner, follow these steps:
Locate your vehicle's OBD2 port, which is usually under the dashboard or near the steering wheel.
Plug your ELM327 OBD2 scanner into the OBD2 port and turn on your vehicle's ignition.
If your scanner has a USB cable, connect it to your computer's USB port. If your scanner has a Bluetooth or WiFi module, enable Bluetooth or WiFi on your computer and pair with your scanner.
Open ScanMaster ELM V15 software on your desktop and select the COM port that corresponds to your scanner. You can check the COM port in Device Manager or in the scanner's settings.
Click on Connect to establish communication between your scanner and your vehicle.
Step 4: Enjoy ScanMaster ELM V15 Software Features
Once you have connected your ELM327 OBD2 scanner to your vehicle and computer, you can enjoy various features of ScanMaster ELM V15 software. You can access different functions from the main menu or toolbar, such as:
DTC: Read and clear diagnostic trouble codes (DTCs) from your vehicle's engine control unit (ECU).
Data: View real-time data from various sensors and parameters in graphical or numerical format.
Oxygen Sensor Test: Perform oxygen sensor tests to check the efficiency of your vehicle's catalytic converter.
Dyno: Measure your vehicle's horsepower, torque, speed, acceleration, etc. using a virtual dynamometer.
Fuel Consumption: Monitor your vehicle's fuel consumption and CO2 emissions.
Print: Print diagnostic reports or data logs for future reference or analysis.